Infinix Note 60 Pro Camera Settings for Best Photos (Note 60 Too)

Short answer: on the Infinix Note 60 Pro, shoot the 50MP main camera at 1× in the default binned (12.5MP) mode for almost everything, switch to full 50MP only in bright daylight when you plan to crop, leave HDR on auto, turn the AI Cam / scene toggle off if colours look over-saturated, tap your subject and pull exposure 0.3–0.7 stops down outdoors, and stay between 1× and 2× zoom. At night, use Night mode on the main camera and brace the phone — OIS helps, but the 8MP ultra-wide doesn't. The scenario tables below give exact values for each situation, and the FAQ at the end covers GCam for the Note 60 Pro.

If you'd rather the camera made those exposure calls for you in real time, that's what a real-time AI Pro Mode does — covered near the end.

Know what hardware you're setting up

The Note 60 Pro's camera, per Infinix's published specs:

• 50MP main camera, f/1.6, with OIS — this is where the quality lives.
• 8MP ultra-wide (f/2.2) — a much lower-resolution module; fine in daylight, soft and noisy indoors.
• 13MP front camera.
• No telephoto. Anything past 1× is a digital crop of the main sensor.
• Android 16 with XOS, Infinix's skin, whose camera app ships Photo, Portrait, Night, Pro and a 50MP / high-resolution option.

The non-Pro Note 60 / Note 60 5G share the XOS camera app, but modules differ by region. Check Settings → About phone before assuming the OIS advice applies to your model. Menu names also move between XOS updates, so treat paths as "look for something like this".

Three settings to change once, before any scenario

Set these once in the camera's settings (gear icon); they apply to every shot:

Then wipe the lens. The camera island collects pocket lint, and a smudge causes more "hazy" and flaring photos than any setting ever will.

Daylight: landscapes, streets, travel

Bright light is where the 50MP sensor can actually resolve detail beyond the binned default, so this is the one scenario where full resolution makes sense.

Why the negative EV: the stock camera tends to expose for the foreground, which clips bright skies to white. Once highlights are gone, no editor brings them back; slightly dark shadows can be lifted later. Watch the sky in the viewfinder and pull the slider until the clouds keep some texture.

When to use 50MP: only in strong light with a steady hand. Full-resolution mode disables pixel binning, so each photo captures more fine detail but also more noise, and it typically processes more slowly. For shots you won't crop, the 12.5MP default looks cleaner at normal viewing sizes.

Avoid the ultra-wide for detail shots. It's usable for a wide street or group shot in sun, but it's an 8MP module — edges soften and fine texture smears.

Portrait: people, pets, product shots

Portrait mode on the Note 60 Pro is software background blur on the main camera, so the settings are mostly about distance and skin processing.

Why beauty off: XOS applies skin smoothing in Portrait and on the front camera, and the default level often erases skin texture and makes faces look plasticky. Set it to off, then add a little back only if you want it.

Why mid-range blur: maximum blur makes edge-detection errors obvious — hair, glasses and ear edges get cut out or smeared. A moderate level looks more like a real lens and hides the mistakes.

Light matters more than any slider. Put the person facing a window or open shade, not with the sun behind them. For product shots, a white sheet of paper as a bounce card does more than any mode.

Indoor: rooms, restaurants, events

Indoor light is several stops dimmer than it looks to your eye. This is where most "soft" Note 60 Pro photos come from. The camera raises ISO, and noise reduction smears the detail.

Stay binned. The 12.5MP default combines four pixels into one, which is exactly what you want when light is scarce. Full 50MP indoors mostly gives you bigger files with more noise.

Hold still after the shutter sound. The stock camera often combines several frames; moving the phone the instant you hear the click is a common cause of blur. Keep it steady for half a second.

Fix yellow casts with white balance. Warm household bulbs push everything orange. In Pro mode, set WB manually to a lower Kelvin value until whites look white. If you don't want to use Pro mode (see our explainer on what Pro mode on a camera actually does), shoot in Photo mode and correct warmth in the gallery editor.

Night: streets, skylines, low light

The Note 60 Pro's main camera has OIS, which is the single biggest advantage at night: the sensor can use longer exposures without hand shake ruining them.

Pull exposure down. Night modes tend to brighten night scenes until they look like dusk, and street lights bloom into white blobs. Negative EV keeps signs readable and the scene looking like night.

Brace, don't just hold. Night mode captures over a second or more. Rest the phone on a wall, railing or table, and wait for the on-screen countdown to finish before moving.

Avoid zoom. At night, digital zoom multiplies noise. Shoot at 1× and crop a little later if you have to.

Moving subjects are the limit. Multi-second night captures blur people who move. For friends at night, use Photo mode with the binned default and accept a bit more noise, or find a brighter spot.

What settings can't fix

After all of the above, some stock-camera behaviour stays: the XOS processing leans toward warm, saturated colour, noise reduction smooths fine texture in dim light, and Auto mode still decides exposure frame-by-frame for you. Pro mode gives you manual sliders, but you have to set ISO, shutter and white balance yourself for every scene change.

That gap is what SensePose is built for. It's an AI camera app for Android built around a real-time AI Pro Mode: its AI reads each scene and sets ISO, EV and shutter live — the way a photographer working in manual would — then merges a RAW HDR+ multi-frame burst on-device, the same multi-frame method Google Pixel and iPhone cameras use. The result is accurate, true-to-scene colour where GCam ports often wash out. On top of that come optional cinematic tone grading and background removal / AI edit. It's free on Google Play (Android 10+, about 28 MB); free exports carry a small watermark that Pro removes. For a full comparison with the stock app and GCam ports on this phone, see our guide to the best camera app for the Infinix Note 60 Pro.

The same scenario-by-scenario approach works on other mid-range phones — here's the equivalent guide for Redmi Note 15 camera settings.

FAQ

Is there a GCam for the Infinix Note 60 Pro?

There's no official Google Camera for any Infinix phone. What exists are unofficial community ports (LMC, BSG and similar builds) sideloaded as APKs. On a phone as new as the Note 60 Pro, working configs are still community experiments, and results depend on the exact sensor revision and XOS build.

Does GCam work on the Infinix Note 60 Pro?

It may partly work. Typical issues with GCam ports on non-Pixel phones include crashes on launch, the ultra-wide or front camera not appearing, green or pink tints, and washed-out colour because the port's processing is tuned for Pixel sensors. An XOS update can also break a port that worked before. If yours won't cooperate, our guide on what to do when a GCam port isn't working covers the fixes and alternatives.

Which GCam version should I try on the Infinix Note 60 Pro?

Community users usually start with a recent LMC 8.4 or BSG build and a config file made for the same sensor. Download only from well-known port maintainers, since APKs from random mirrors are a security risk. Expect trial and error, and keep the stock camera as your fallback.

Is there an alternative to GCam for the Note 60 Pro from Google Play?

Yes. SensePose installs from Google Play like any other app, so there's no sideloading or config file, and it survives XOS updates. It merges a RAW HDR+ multi-frame burst on-device and its real-time AI Pro Mode sets exposure per scene, which GCam ports lock to auto.

What's the best resolution setting for the Infinix Note 60 Pro camera?

Use the default binned 12.5MP output for everyday, indoor and night photos, because it gives cleaner images in anything but strong light. Switch to full 50MP only in bright daylight when you plan to crop into the shot.

Should I turn AI Cam on or off on the Note 60 Pro?

Leave it off by default. The stock scene AI tends to raise saturation and warmth, which can make skies and skin look unnatural. Turn it on for food or flowers if you like a punchier look.